Version 4.1.0
- New: Automatic Low Power Mode. BatFi can turn Low Power Mode on when the battery drops to a level you choose, and turn it off again when you plug in.
- New: slow down apps on battery. Apps you pick run on the Mac’s efficiency cores while it’s on battery, and get full speed back when you switch to them, plug in, or quit BatFi. Apps playing audio or on a call are left alone. You can also point at an app in the menu’s list of apps with high energy usage to slow it down, or to stop slowing it (this needs an active licence). Apps on your slow-down list show a tortoise next to their name; it turns grey when the app isn’t being slowed right now, and pointing at it tells you why.
- New: BatFi warns you when another charge-control tool is installed (the battery CLI, AlDente, Battery Toolkit, batt or bclm), because two tools setting the charge limit fight each other. The warning shows in Charging settings, in the menu, and in the “charge limit isn’t holding” notification, and tells you how to remove the other tool and everything it left behind.
- Changed: Settings no longer has an Advanced pane. Its options moved to Charging and General, and options your Mac can’t use are hidden.
- Changed: crash reports are off until you turn them on in Settings.
- Fixed: right after launch, while BatFi was still reading your licence, it could briefly hand charging back to macOS and drop your charge limit. It now waits for the licence.
- Fixed: Inhibit charging is back in the menu and in Settings › Hotkeys on Macs that use Apple’s charge limit (macOS 27). BatFi holds the battery at its current level until you stop it, start another override, or leave the Mac unplugged for two minutes.
- Fixed: “Automatically turn off charging when the battery gets hot” works on Macs that use Apple’s charge limit (macOS 27). While the battery is hot, BatFi holds it at its current level.
- Fixed: on Macs whose firmware holds the charge limit itself, BatFi now shows charging as paused while the battery waits a few points below your limit, instead of saying it’s charging, and the MagSafe green light option is available.
- Fixed: while macOS calibrates the battery at 100%, the menu no longer flips between “charging to 100%” and “draining to the limit”, and you no longer get a new banner each time macOS moves between its own charging steps.
- Fixed: the menu bar icon changes as soon as you plug in or unplug. Before, it waited until the charge limit had been applied, which on macOS 27 with a limit below 80% could take up to 45 seconds.
- Fixed: BatFi kept the disk busy by making macOS re-check the app over and over in the background.
- Fixed: the charging mode banner appears every time you plug in, not only the first time.
- Fixed: the menu bar icon turns yellow as soon as you switch Low Power Mode on in System Settings, instead of up to a minute later.
- Fixed: keyboard shortcuts could stay paused after you edited one in Settings.
- Fixed: BatFi no longer delays automatic sleep on Macs where charging can’t be paused.
- Fixed: apps that have already quit no longer appear in the menu’s list of apps with high energy usage.
- Fixed: Settings tab titles in Russian and Brazilian Portuguese were too long to fit.
Version 4.0.3
- Fixed: some newer messages — macOS charging to 100% on its own, the battery being held at 100% until you unplug, the warning that your charge limit isn’t holding, and the warning about sleep during a manual discharge — appeared in English, or as an internal identifier, when BatFi runs in another language. They are now translated into every language BatFi supports.
Version 4.0.2
- Fixed: closing the menu could, on rare occasions, freeze BatFi — the menu bar icon stopped responding to clicks and the only way out was to force quit. Your charge limit kept working the whole time, because the part of BatFi that enforces it runs separately. The cause was a bug in a third-party library BatFi relies on; BatFi now uses a version in which it is fixed.
Version 4.0.1
- Fixed: when “Charge to 100%” finished, BatFi handed the full battery straight back to your charge limit — and if you have “Discharge battery when overcharged” turned on, it began draining away the charge you had just asked for, seconds after it arrived. It now keeps the battery at 100% until you unplug the charger, and says so in the menu.
- Fixed: lowering your charge limit below the current battery level made the menu announce that macOS was charging to 100%, and send a notification saying so, while the power distribution right underneath showed the battery draining. BatFi now reads which way the current is actually flowing instead of taking the system’s word for it.
- Fixed: a charge limit below 80% could be reported as failed while it was still being applied — macOS can take up to 45 seconds to accept one, and BatFi gave up waiting after 15. It now waits as long as the apply is allowed to take.
Version 4.0.0
BatFi 4.0.0 changes the way charging is controlled deep down, so it keeps working on macOS 27.
- Fixed: “Charge to 100%” could switch itself off the instant you switched it on, so the first click looked like it did nothing and you had to click a second time. It now stays on until you turn it off or the charger has genuinely been unplugged for two minutes — and switching it on while the battery already reads 100% holds the charge there, instead of letting it drain back to your limit.
- New charging backend. BatFi now asks your Mac's firmware what it can actually do, instead of guessing from the macOS version. Options your Mac doesn't support are hidden, so Settings no longer shows options that do nothing.
- Works on macOS 27, where Apple replaced the mechanism BatFi had always relied on. The charge limit can go below 80% there, and the menu explains what macOS is doing to your battery when it takes over.
- Automation rebuilt: a clearer rule editor, address search that works, and location rules that use geofencing instead of following you around.
- More reliable, especially the background helper — BatFi checks that it belongs to this copy of the app, recovers when it stops answering, and shuts it down properly when you quit.
- Many bug fixes.
Version 3.1.1
- Fixed: "Run on Battery" could turn itself off shortly after you unplugged the charger. BatFi clears leftover charge limit overrides at that point, and it was clearing this one too. Run on Battery now stays on until you turn it off.
- Notifications and the Charging settings pane now show the charge limit an active Automation rule applies, so you can tell when a rule is overriding your limit.
Version 3.1.0
- New: Automation. Your charge limit can now change by itself based on when and where you are. Create rules in the new Automation settings pane. Each rule has its own charge limit, and you can give it a schedule, a location, or both.
- The menu now shows the currently active automation rule, so you always know what's affecting charging.
Version 3.0.5
- Adds support for macOS 26.4 and newer.
Version 3.0.4
- Fixed menu items not displaying on macOS 15.7.4 when enabled in Settings.
- Improved menu bar icon positioning for consistent placement on first launch.
Version 3.0.3
- Fixed menu content being clipped or incorrectly sized on macOS 26.
- Fixed memory leaks in background observation tasks for improved stability.
- Ukrainian localization
- Performance improvements
Version 3.0.2
- Fixes support for macOS 14.8
Version 3.0.1
- Add support for macOS 14.8
Version 3.0.0
- Add support for macOS 15.7 and macOS 26 Tahoe
- Add option to remove the license
- Bugfixes
- Requires macOS 15
Version 2.4.2
- Removes the requirement to provide an email during app activation.
Version 2.4.1
- This update resolves the issue with the status item icon on macOS versions 13 and 14.
Version 2.4.0
- New status icon settings, including a static icon
- New icon for inhibited charging
- In Low Power Mode, the standard icon will display a yellow background
Version 2.3.3
Version 2.3.2
- Bug fixes
- Japanese localization updated
Version 2.3.1
- Improve the formatting of the “Time Left” label in the status bar
Version 2.3.0
- Add an option to disable sleep during discharging to allow for discharging in clamshell mode.
- The app will automatically turn off “Charge to 100%” when the charger has been disconnected for a certain period of time.
- Update localizations.
- Bug fixes
Version 2.2.0
- Add options to toggle high/low power mode using the menu and global hotkeys
- Add an option to hide the status bar icon.
- Update localizations.
- Bug fixes
Version 2.1.1
- The app detects if it's running on a notebook
- Localization improvements
Version 2.1.0
- macOS 15 removed the System 80% Charging Limit option. The keyword here is “system.” An option in BatFi, disabled by default, automatically turned on the system charging limit when the Mac was about to go to sleep. It was useful when the Mac was charging, and the battery state was still below the given limit, and the user put it to sleep. This option would turn on the system charging limit, which would charge the computer to 80% and then stop, even while in sleep mode, reliably. Obviously, it wasn’t useful at all if the user had a limit set to anything other than 80%. Anyone using this version of macOS, or those who updated it on a separate volume, will lose this functionality, even when running macOS 13 or 14. The update hides the toggle switch in the app’s settings for macOS 15 users
- The update introduces options to display the last time the battery was discharged and fully charged
- A new option provides a notification about battery calibration when the battery hasn’t been discharged for over a month
- The status icon is now more customizable, with a new option to display the battery percentage next to it
- Improved app reliability
Version 2.0.2
- macOS 15 Beta 5 removed the System charging limit option. Anyone using this macOS version, or even those who updated it on a separate volume, will lose this functionality, even on macOS 13 or 14. Unfortunately, this change breaks BatFi, and this update silently ignores errors caused by this issue. If you haven’t updated macOS, everything will work as before. In the meantime, I will look for a workaround if one exists.
- Japanese, Turkish and German localization updated
Version 2.0.1
- Increases helper connection timeout from 5 seconds to 30 seconds to decrease the chance of showing the “Houston, we have a problem” notification.
- Fixes status item drawing issue
- Turkish localization added
- Japanese and Italian localization updated
- The app automatically check for updates
- The system charge limit or inhibit charging on sleep won't be invoked if a temporary charging limit is set.
- Improvements for macOS 15 have been added. macOS 15 Developer Seed 2 is required.
Version 2.0.0
BatFi 2.0.0 is the most significant release to date and perhaps the most substantial one we will ever see. It fundamentally alters the app's core functionality, enhances the user interface, and introduces support for app shortcuts, global hotkeys, and more.
- The minimum charging limit is now lowered to 50%
- Enhanced menu customizability
- Adjustable "Low Battery" notification threshold
- New hotkeys pane in settings
- Enhanced reliability of the helper tool
- Added elapsed time display in the menu
- Added option to show time left when available
- Sleep charging limits options are moved to the charging pane
- Added the ability to inhibit charging and discharge the battery on demand with a command from the menu (or with a hotkey)
- Added support for app intents (Siri Shortcuts) – with them, you can override the charging limit to any value, etc.
- App will send crash reports (to Sentry) by default (it can be disabled in the app's settings)
- Updated app icon
- Refined the status bar icon
- Added tip jar pane
- Improved energy efficiency
- Portuguese (Brazilian) and Dutch localization added
- Accurate battery temperature display
- The battery temperature limit has been increased to 40°C
Version 1.4.2
- Chinese localization
- UI Layout improvements
- German localization improvements
Version 1.4.1
- Koren localization
- Russian localization
- Battery Health should now match the value provided by the OS
- Bug fixes
Version 1.4.0
- Option to turn on system charging limit on sleep
- Option to show power graph
- Option to list apps with high energy usage
- French localization
- Updated German and Polish localization
- Bug fixes
Version 1.3.1
- Fixed a bug that caused the app to crash when loading charts/li>
- Minor chart improvements
Version 1.3.0
- Added chart with battery percentage and app state from the last 12h
- Redesigned Settings. Two new tabs: the "Menu Bar," where there are all options related to the app's menu and status icon and the "Advanced", where more advanced settings for charging are now located
- Added German localization. More localizations to come. If you want to help, please let me know: [email protected]
- Improved app's reliability
- Bug fixes
- Ads the option to show a notification when the battery drops to 20% or below
Version 1.2.0
- Added option to light up MagSafe with a green light when charging is paused and the charging limit is reached
- Added option to automatically pause charging when the Mac goes to sleep.
- Added option to blink the MagSafe charger a couple of times when the app starts discharging the battery
- Added Japanese and Polish localizations. More localizations to come. If you want to help, please let me know: [email protected]
- Improved app's reliability
- This version now stores the history of charging on disk, laying the foundation for upcoming features
- Bug fixes
Version 1.1.0
- Replaces battery health with the calculated value based on the current battery capacity
- Bug fixes